Suzhou Zhemu Industrial Equipment Co.,Ltd
Suzhou Zhemu Industrial Equipment Co.,Ltd
Add to Cart
High Mechanical Strength and Hardness DIN 2.4375 UNS N05500 Nickel Alloy Monel K500 Plate
Chemical Composition, %
| Alloy | % | Ni | Cu | Al | Ti | Fe | Mn | S | C | Si |
| Monel k500 | min | 63 | 27.0 | 2.30 | 0.35 | |||||
| max | 33.0 | 3.15 | 0.85 | 2.0 | 1.5 | 0.01 | 0.25 | 0.5 |
Physical properties
| Density | 8.05 g/cm3 |
| Melting point | 1288-1343 ℃ |
Mechanical properties
| Alloy state |
Tensile strength Rm N/mm2 |
Yield strength RP0.2 N/mm2 |
Elongation rate A5 % |
| Monel k500 | 1100 | 790 | 20 |
Features:
Monel K500 has the same corrosion resistance as Monel 400, and has better thermal corrosion resistance and long-term structural stability.
It is mainly used to manufacture turbine blades and gas turbine blades with working temperature below 750℃ on aero-engines. Used to manufacture fasteners and springs on ships; Pump and valve parts on chemical equipment; Scraping blades on papermaking equipment, etc.
| Material | Inconel,Hastelloy,Monel,Incoloy,GH,Precision alloy,Stainless steel |
| Shape | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
| Grade |
Inconel:Inconel600(N06600 GH3600),Inconel601(N06601 GH3600),Inconel625(N06625 GH3625), InconelX-750(N07750 GH4145),Inconel 718(N07718 GH4169),Inconel690 |
|
Hastelloy:Hastelloy B-2,Hastelloy C,Hastelloy C-267(N10276),Hastelloy C-4, Hastelloy C-22(N06022),Hastelloy G30(N06030) |
|
| Monel:Monel 400(N04400),Monel K500(N05500) | |
|
Incoloy:Incoloy A-286(GH2132 N662),Incoloy800 800H 800HT,Incoloy725, Incoloy825,Incoloy925,Incoloy926(N08926 1.4529) |
|
|
GH:GH2132(N66286 A286 Gr6),GH3625(Inconel625 UNS N0), GH4169(Inconel718 UNS N0),GH3030,GH3039,GH4033,GH3128 |
|
| Precision alloy:4J36,4J29,1J79 | |
| Stainless steel:Alloy 20(N08020),904L(N08904),254SMo(F44 S31254) | |
| Other | |
| Specification | Wire: 0.01-10mm |
| Strip: 0.05*5.0-5.0*250mm | |
| Bar: φ4-50mm;Length 2000-5000mm | |
| Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm | |
| Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm | |
| Product Characteristics |
1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. |
| 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. | |
| Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
| Inspection | ISO,SGS,BV and so on. |
| Application |
High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
| Packaging | 1. cases packed in wooden cases |
| 2. paper packaging | |
| 3. plastic packing | |
| 4. foam packaging | |
| 5.Packaging according to customer requirements or products |