Suzhou Zhemu Industrial Equipment Co.,Ltd
Suzhou Zhemu Industrial Equipment Co.,Ltd
Add to Cart
These Alloy 201 Round Bar are resistant to the corrosive influences of most media and are impervious to severe corrosion types, such as pitting and intercrystalline corrosion. Due to Nickel 201 Flat Bar low Carbon content, LC-Nickel 99.6 exhibits a high resistance to corrosion caused by caustic alkalis, even at elevated temperatures.
Nickel 201 Rod Delivery condition
Cold drawn Inconel 600 Shaft
The strain Hardened Nickel 201 Hex Rod
Peeled, center less ground & polished
Turned & rough polished Nickel 201 Welding Rod
Trailed center less ground & polished
Peeled and polished Nickel 201 Bar
Smooth Turned & Polished Nickel 201 Bar
Solenoid quality
Annealed Nickel 201 Bar
Hardened strain Ni 201 Round Bar
Nickel 201 Round Bar available from diameter 10mm (0.39") in various pre-cut lengths from stock. Our Precision quality Nickel 201 shaft bars are regularly used in - Pump Shaft, Valve Shafts, Piston Shafts, Cylinder Shafts, Bearing Bars and Boat Shafts.
No Nickel 201 round bar enquiry is too large or too small. We will gladly discuss any special requirements you may have that fall outside of our stock range that may be supplied directly from the mill. Machining and grinding are further capabilites of Barpoint strengthening our promise to offer a quality comprehensive service.
|
Material
|
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
|
|
Shape
|
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
|
|
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
|
|
Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
|
|
|
Alloy : Alloy 20/28/31
|
|
|
Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
|
|
|
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,
Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
|
|
Haynes: Haynes 230/556/188
|
|
|
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
|
|
|
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,
Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
|
|
Incoloy: Incoloy 800/800H/800HT/825/925/926;
|
|
|
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
|
|
|
Monel: Monel 400/K500/R405
|
|
|
Nitronic: Nitronic 40/50/60;
|
|
|
Nimonic: Nimonic 75/80A/90/A263 ;
|
|
|
Specification |
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
|
Product Characteristics |
1.According to the preparation process can be divided into deformation superalloys,
casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
|
Standard
|
GB,AISI,ASTM,DIN,EN,SUS,UNS etc
|
|
Inspection
|
ISO,SGS,BV and so on.
|
|
Application |
High temperature components such as turbine blades, guide vanes, turbine disks,
high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
|
Packaging |
1. cases packed in wooden cases
2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products |
|
Delivery
|
7-25days orAccording to the product
|
|
Payment |
L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments
for offline orders. |